Hypertherm HyIntensity Fiber Laser Rev.3 - Manual (Page 31)

Compliance Information W-1
1/12
Attention
Genuine Hypertherm parts are the factory-recommended
replacement parts for your Hypertherm system. Any
damage or injury caused by the use of other than genuine
Hypertherm parts may not be covered by the Hypertherm
warranty, and will constitute misuse of the Hypertherm
Product.
You are solely responsible for the safe use of the Product.
Hypertherm does not and cannot make any guarantee
or warranty regarding the safe use of the product in your
environment.
General
Hypertherm, Inc. warrants that its Products shall be
free from defects in materials and workmanship for the
specific periods of time set forth herein and as follows:
if Hypertherm is notified of a defect (i) with respect to
the plasma power supply within a period of two (2) years
from the date of its delivery to you, with the exception of
Powermax brand power supplies, which shall be within a
period of three (3) years from the date of delivery to you,
and (ii) with respect to the torch and leads within a period
of one (1) year from its date of delivery to you, and with
respect to torch lifter assemblies within a period of one
(1) year from its date of delivery to you, and with respect
to Automation products one (1) year from its date of
delivery to you, with the exception of the EDGE Pro CNC
and ArcGlide THC, which shall be within a period of two
(2) years from the date of delivery to you, and (iii) with
respect to HyIntensity fiber laser components within a
period of two (2) years from the date of its delivery to
you, with the exception of laser heads and beam delivery
optical cables, which shall be within a period of one (1)
year from its date of delivery to you.
This warranty shall not apply to any Powermax brand
power supplies that have been used with phase
converters. In addition, Hypertherm does not warranty
systems that have been damaged as a result of poor
power quality, whether from phase converters or incoming
line power. This warranty shall not apply to any product
which has been incorrectly installed, modified, or
otherwise damaged.
Hypertherm provides repair, replacement or adjustment
of the Product as the sole and exclusive remedy, if and
only if the warranty set forth herein properly is invoked
and applies. Hypertherm, at its sole option, shall repair,
replace, or adjust, free of charge, any defective Products
covered by this warranty which shall be returned with
Hypertherm’s prior authorization (which shall not be
unreasonably withheld), properly packed, to Hypertherm’s
place of business in Hanover, New Hampshire, or to an
authorized Hypertherm repair facility, all costs, insurance
and freight pre paid by the customer. Hypertherm shall
not be liable for any repairs, replacement, or adjustments
of Products covered by this warranty, except those made
pursuant to this paragraph and with Hypertherm’s prior
written consent.
The warranty set forth above is exclusive and is in lieu
of all other warranties, express, implied, statutory, or
otherwise with respect to the Products or as to the
results which may be obtained therefrom, and all implied
warranties or conditions of quality or of merchantability
or fitness for a particular purpose or against infringement.
The foregoing shall constitute the sole and exclusive
remedy for any breach by Hypertherm of its warranty.
Distributors/OEMs may offer different or additional
warranties, but Distributors/OEMs are not authorized
to give any additional warranty protection to you or make
any representation to you purporting to be binding upon
Hypertherm.
Warranty