Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 98)

Power switch
90 · G&D DVICenter
Configuration
Assigning a power switch power outlet to the target module
If at least one G&D Hardboot CCX power switch is provided to the system, you can
assign one or more power outlets to a target module.
The assigned power outlets can be switched via the Operation menu.
Further information:
 Switching the power outlets assigned to the target on page 87
How to change the assigned power switch outlets:
1. Press the Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F11 to call the Configuration menu.
3. Select the Target entry and press Enter .
4. Select the target module you want to assign one or several power switch power
outlets to or whose assignment you want to cancel and press F5 .
5. Select the Assign power switch outlets entry and press Enter .
6. The Target Power menu lists all power switches and the available power outlets.
The right column displays the target module name if the power outlet has already
been assigned to a target module:
7. Select the power outlet which you want to assign to the target module or whose
assignment you want to cancel.
8. Press F8 to assign the power outlet to the currently active target module or to can-
cel this assignment.
9. Press F2 to save your settings.
Target Power
Sort Alph+
Search .......................
power switch1
1.1 CPU-001
1.2
power switch2
1.1 CPU-002
1.2 CPU-002
F9: Operation F10:Pers.Profile
F11:Config F12:Info
Power outlets assigned to the currently active target module are marked with
an arrow ().