Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 128)

Controlling the matrix switch via XML
120 · G&D DVICenter
Configuring accesses of devices for XML control
Use the web application Config Panel to define »remote control« accesses and their
settings.
How to create a new access or edit an existing access:
1. In the directory tree, click
KVM matrix systems > [Name] > Matrix switches .
2. Right-click the device you want to configure and click Configuration on the context
menu.
3. Click the Network> Remote Control tabs.
4. To add a new remote control access, click Add .
To edit an existing access, click Edit .
5. Enter or edit the following data:
6. Click OK to save your settings and to close the window.
IMPORTANT: These accesses are required to control the device via XML.
Access: Select the protocol ( TCP ) or ( UPD ) to process XML communi-
cation.
Port: Enter the port to process XML communication.
Ports 80, 443 and 27996 are used for other services. They are
not available for XML control.
Status: Select if access is Enabled or Disabled .
Encryption: The following types of encryption are supported:
 Unencrypted: Select the option None to transmit data without
encryption (default).
 Password encryption: Select the option Password: CBC-3DES to
transmit login passwords with encryption.
 Transport encryption: Select the option CBC-3DES to encrypt
the entire connection.
Encrytion key: After enabling an encryption type, enter the key (192 bit) in
the form of 48 hex digits.
Initialization
vector:
Enabling the encryption type CBC-3DES additionally requires
an initialization vector. Enter the initialization vector (64 bit)
in the form of 16 hex digits.