Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 36)

Accessing target modules via select keys
28 · G&D DVICenter
The Assign select key set dialogue opens. The left column displays the name of the
target module and the right column shows the assigned select key(s).
6. Select the target module you want to assign a select key to or whose select key
you want to change.
7. Press F5 and enter the desired select key.
8. If you want to create or change the select keys for other target modules, repeat
steps 6 and 7.
9. Press F2 to save your settings.
Assigning a select key set to a user account
By assigning a select key set to a user account, the select keys defined in the set are
interpreted and the particular target module is accessed.
How to assign a select key set to a user account or cancel the existing assignment:
1. Press the Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F10 to call the Personal Profile menu.
3. Select the Select key set entry and press Enter .
4. Select the desired select key set.
5. Press F8 to (de)activate the assignment.
6. Press F2 to save your settings.
ADVICE: Use the menu’s search function, the view filter or the sort criteria (see
page 9 ff.) to limit the selection of list entries.
NOTE: The chapter Changing the select key modifiers and the valid keys provides infor-
mation on how to use valid keys as select key set.
ADVICE: Use the menu’s search function or the sort criteria (see page 9 ff.) to limit
the selection of list entries.
NOTE: An assigned select key set is marked with an arrow ().