Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 60)

Target groups and view filters
52 · G&D DVICenter
Target groups and view filters
Difference between target groups and view filters
The target modules of the matrix system can be organised into target groups and
view filters.
Intended use of target groups
Target groups enable the administrator to quickly assign the rights of a user or a user
group for all target modules within a group.
Intended use of target groups
View filters enable the users of a matrix system to organise the different target mod-
ules into view groups. Especially in large matrix systems, the creation of view
groups gives you the possibility to keep a better overview over the system.
You can group the target modules according to their view filter (e.g. the server room)
or to any other features (e.g. to the operating system of the connected computer).
Administrating target groups
The »New Targets« target group
The New Targets target group is preconfigured in the matrix system. This group auto-
matically contains any target module that is connected to the system. For this, the
computer connected to the module also has to be switched on.
If you want to provide a user or a user group with particular rights to all recently
connected target modules, change the device group rights of either the user account
or the user group.
NOTE: The different target modules can be members of several target groups.