Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 146)

Tradeswitch function (optional)
138 · G&D DVICenter
Detailed configuration of a Tradeswitch workplace
Assigning devices to a Tradeswitch workplace
How to assign target or user modules to the Tradeswitch workplace:
1. Press the hotkey Ctrl+Num (default) to open the on-screen display.
2. Press F11 to call the Configuration menu.
3. Select the Tradeswitch function entry and press Enter .
4. Press F5 to edit the selected Tradeswitch workplace.
5. Select the Members entry and press Enter .
6. The Assign Tradeswitch Function menu opens. The left-hand column displays the
target module name or the user module name. The right-hand column provides
the assigned Tradeswitch key(s).
7. Select the user or the target module to assign a Tradeswitch key to or whose
Tradeswitch key you want to change.
8. Press F5 and enter the desired Tradeswitch key.
9. Repeat steps 7 and 8 to create or change the Tradeswitch keys.
10.Press F2 to save your settings.
NOTE: Giving the targets self-explanatory names refering to the function or the loca-
tion of the device facilitates configuring the Tradeswitch workplace.
Detailed information on renaming the target modules is provided on page 62.
ADVICE: The view filter (see page 10) can be used to either display the user mod-
ules (Consoles) or the target modules (Targets) in the list.
ADVICE: Use the menu’s search function or the sort criteria (see page 9 ff.) to limit
the selection of list entries.