Reinitialising usb input devices – Guntermann & Drunck DVICenter DP16 Configuration and Operation User Manual
Page 88
User modules
80 · G&D DVICenter
How to enable/disable the generic HID mode of the user module:
1. Press the
Ctrl+Num
(default) hotkey to open the on-screen display.
2. Press
F11
to call the Configuration menu.
3. Select the
Console
entry and press
Enter
.
4. Select the
Generic HID
entry and press
F8
to select the keyboard type:
5. Press
F2
to save your settings.
Reinitialising USB input devices
After connecting a USB keyboard or mouse to the KVM extender, the input devices
are initialised and can be used immediately.
Some USB input devices require a reinitialisation of the USB connection. Enable
the automatic reinitialisation of USB devices if a USB keyboard or mouse does not
respond to your inputs during operation.
How to enable/disable the reinitialisation of USB devices:
1. Press the
Ctrl+Num
(default) hotkey to open the on-screen display.
2. Press
F11
to call the Configuration menu.
3. Select the
Console
entry and press
Enter
.
ADVICE:
Use the menu’s search function or the sort criteria (see page 9 ff.) to limit
the selection of list entries.
off:
You can connect either a USB keyboard or a USB mouse to the top
Keyb./Mouse
interfaceof the user module.
on:
The data from any USB device connected to the top
Keyb./Mouse
inter-
face is transmitted to the active target module.
IMPORTANT:
To use the generic HID device, enable the USB HID mode
Generic HID
of the target modules you want to access (see page 65).
ADVICE:
Use the menu’s search function or the sort criteria (see page 9 ff.) to limit
the selection of list entries.