Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 31)

Accessing target modules (basic functions)
G&D DVICenter · 23
Disconnecting the target module
The Disconnect function disconnects the current connection to the target module.
After the function has been carried out, the Select menu is displayed.
How to disconnect the connection to a target module:
1. Press the Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F9 to call the Operation menu.
3. Press D or select the D - Disconnect entry and press Enter .
Enhanced functions
Automatically accessing a target module
The Default Target setting enables the selection of a target module, which the user
automatically accesses after logging in to the matrix system.
How to select a target module for automatic access:
1. Press the
Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F10 to call the Personal Profile menu.
3. Select the Default target entry and press Enter .
The Default target menu opens. If already defined, the footer displays the currently
selected target module (Current).
4. Select the target module to be accessed directly after the login.
5. Press F8 to activate the selection. The active target module is marked with an
arrow ().
6. Press F2 to save your changes.
NOTE: After the Disconnect function has been carried out, you are still logged in at
the matrix system.
Use the User logout function described on page 4 to log out of the system.
ADVICE: After the on-screen display has been called, you are enabled to acti-
vate the Disconnect function by pressing Ctrl+D .
ADVICE: Use the menu’s search function, the view filter or the sort criteria (see
page 9 ff.) to limit the selection of list entries.