Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 108)

System settings and functions
100 · G&D DVICenter
System settings and functions
Basic configuration
Renaming the matrix switch
How to rename the matrix switch:
1. Press
Ctrl+Num (default) to open the on-screen display.
2. Press F11 to open the Configuration menu.
3. Select System and press Enter .
4. Select Name and press Enter .
5. Enter the new name and press Enter .
6. Press F2 to save your settings.
Network settings
The network ports on the back panel of the matrix switch enable you to carry out the
following network functions:
 execute the matrix switches’ network configuration
 authenticate against directory services (LDAP, Active Directory, RADIUS,
TACACS+)
 time synchronisation via NTP server
 forward log messages to syslog servers
 execute firmware updates and backups
Configuring the network ports
Configure the network settings in the on-screen display in order to make the matrix
switch available for the entire network.
NOTE: The functions listed above are carried out in the Config Panel web application
and described in the manual of the web application.
NOTE: In the defaults, the following settings are pre-selected:
 IP address of network interface A: 192.168.0.1
 IP address of network interface B: address obtained using DHCP
 global network settings: settings obtained using DHCP