Guntermann & Drunck DVICenter DP16 Configuration and Operation User Manual
Page 81
Target modules
G&D DVICenter · 73
3. Press
Ctrl + F12
to display the route information:
The exemplary information window provides the following information:
The CPU-Server target module is connected to the Master matrix switch. The
devices are connected through the Transmission port of the target module and the
CPU 1 of the matrix switch.
4. The CON-Admin user module is connected to the Master matrix switch. The
devices are connected through the Console 1 port of the matrix switch and the
Transmission port of the user module.
Route Information
CPU-Server
00005821
Master
000010BE
Transmission CPU 1
------------------------------
CATCenterNEO
000010BE
CON-Admin
00001AEB
Console 1 Transmission
ESC
ADVICE:
If the user module accesses a target module, the arrows of this active
connection are displayed in blue.
NOTE:
Any slave devices, which are connected to the master device of the
matrix system, are also displayed in the route information as long as the con-
nection between target module and user module is established through the
devices.