Guntermann & Drunck DVICenter DP16 Configuration and Operation User Manual
Page 45
Switching the target modules automatically or manually
G&D DVICenter · 37
4. Press
F3
and collect the following data in the Add Scanmode Set menu:
5. Press
F2
to save your settings.
Changing the name and global allocation of a scanmode set
How to change the name and/or Global setting of a scanmode set:
1. Press the
Ctrl+Num
(default) hotkey to open the on-screen display.
2. Press
F10
to call the Personal Profile menu.
3. Select the
Scanmode set
entry and press
Enter
.
4. Select the scanmode set whose setting you want to change.
5. Press
F5
to change the following data in the
Edit Scanmode Set
menu:
6. Press
F2
to save your settings.
Name:
Enter the desired scanmode set name and press
Enter
.
Global:
Select
yes by pressing
F8
if you want the scanmode set in the personal
profile to be available for all users of the system.
default:
no
Name:
Enter the desired scanmode set name and press
Enter
.
Global:
Select
yes
by pressing
F8
if you want the scanmode set in the per-
sonal profile to be available for all users of the system.
default:
no
NOTE:
This option can only be activated by users with the Superuser right
NOTE:
This option can only be activated by users with the Superuser right