Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 87)

User modules
G&D DVICenter · 79
Activating the support for special PS/2 keyboards
How to activate the support for a special PS/2 keyboard:
1. Press the Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F11 to call the Configuration menu.
3. Select the Console entry and press Enter .
4. Select the Enh. keyboard entry and press F8 to select the keyboard type:
5. Press F2 to save your settings.
Support of any USB device
In the Generic-HID mode, the data from the USB devices connected to the top Keyb./
Mouse interface is transmitted to the active target module.
In the Generic-HID mode, you can connect USB hubs or USB composite devices to the
top Keyb./Mouse interface of the user module.
USB composite devies are USB devices that are connected to a computer via one USB
cable, but consist of separate HID devices (e.g. keyboard/mouse or touchpad/
mouse).
When connecting a USB hub or a USB composite device containing multiple USB
devices, only the first of the connected HID devices can be used in the Generic HID
mode. The OSD informs you if other HID devices of the composite device or the
hub are detected.
ADVICE: Use the menu’s search function or the sort criteria (see page 9 ff.) to limit
the selection of list entries.
default: standard keyboard
PixelPower Clarity (blue): special PixelPower Clarity (blue) keyboard
PixelPower Rapid Action: special PixelPower Rapid Action keyboard
SKIDATA1: special SKIDATA1 keyboard
NOTE: When the Generic-HID mode is enabled, it is not possible to operate the OSD
with a keyboard connected to the top Keyb./Mouse interface.
NOTE: In the Multi User mode, the generic HID device is available at the first active
user module. Once this user module logs off and another user module logs in, the
generic HID device of the other user module is available.