Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 65)

Target modules
G&D DVICenter · 57
Target modules
The target modules serve to connect the target computers to the matrix system. The
target modules can be accessed through the user modules.
Adjusting the access and config rights
Accessing a target module
In order to carry out setting deviating from the rights assigned to the existing target
groups, you can assign individual access rights in addition to the group rights.
How to change the user account’s target access rights:
1. Press the Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F11 to call the Configuration menu.
3. If you want to change this right of a user account, select the User entry.
For changing the right of a user group, select the Usergroup entry.
4. Press Enter .
5. Select the user account or the user group whose target access rights you want to
change and press F5 .
6. Select the Target access rights entry and press Enter .
7. Select the desired target module whose access right you want to change.
8. Press F8 to select one of the following options:
ADVICE: It is recommended to use target groups to assign the target access rights
(see page 48).
This way, you are able to keep an overview of the KVM matrix systems. It also ben-
efits the operating performance within the on-screen display of the system.
ADVICE: Use the menu’s search function or the sort criteria (see page 9 ff.) to limit
the selection of list entries.
no: denies access to the computer connected to the target module
view: enables to view the screen content of the computer connected to the
target module
full: full access to the computer connected to the target module
NOTE: The View mode enables you to access the monitor image of the target
computer. Inputs, however, are not possible.