User modules, Operating modes of user modules, Standard operating mode – Guntermann & Drunck DVICenter DP16 Configuration and Operation User Manual
Page 82: Open access operating mode, Video operating mode
User modules
74 · G&D DVICenter
User modules
The target computers connected to the KVM matrix system are operated at the user
modules of the system.
Operating modes of user modules
Depending on the intended use of the user module, the module’s operating mode
can be selected from the following three options:
Standard operating mode
The Standard operating mode only permits access to the matrix system after the user
has entered their username and password.
The user rights can be individually adjusted in the settings of the user accounts.
Open Access operating mode
In this mode, the access to the matrix system is not password-protected.
For this user module, you can configure the same access rights as for a user account.
Video operating mode
A video console (only possible when combined with the optional Push/Get function) is
especially suited when used with a projector since mouse and keyboard do not have to
be connected.
If the video console is provided with mouse and keyboard, inputs can only be made
in the on-screen display.
It is possible to configure the same access rights for this user module as for a user
account.
NOTE:
This operating mode is preset in the default.
IMPORTANT:
The configured access rights apply for all users at this user module.
IMPORTANT:
The configured access rights apply for all users at this user module.
NOTE:
A video console is not displayed. The accessing video console is therefore
not highlighted to other accessing users. A user without Multiuser rights can access
the user module simultaneously to the video console.