Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 117)

System settings and functions
G&D DVICenter · 109
The desired information is displayed.
5. Press Esc to leave the menu.
Rights administration
Login rights for the »Config Panel« web application
The Config Panel web application offers a graphical user interface to configure the
matrix system.
The web application provides an alternative to configuring the matrix switches via
the devices’ on-screen display at the user consoles and can be applied independently
from the user modules in the network.
How to change the login right for the Config Panel web application:
1. Press the
Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F11 to call the Configuration menu.
3. If you want to change this right of a user account, select User .
For changing this right for a user group, select Usergroup .
4. Press Enter .
5. Select the user account or the user group whose login rights for the Config Panel
web application you want to change and press F5 .
6. Select Config rights and press Enter .
7. Select WebIf Login and press F8 to select one of the following options:
8. Press F2 to save your settings.
ADVICE: You can also create a list of individual ports or port ranges (e. g. 7-11 ).
You can combine the list elements in any way. The elements are separated
with a comma. The list is interpreted from left to right.
By putting an exclamation mark in front of a list element, the element is exclu-
ded from the list of ports to be tested.
Enter the list
1-16,!3-10,5 , for example to test ports 1 to 16 and to exclude ports
3 to 10. Port 5 is tested as well.
IMPORTANT: For applying the web application, the user accounts or the user
groups have to hold the WebIf Login right.
yes: allows access to Config Panel web application
no: denies access to Config Panel web application