Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 89)

User modules
G&D DVICenter · 81
4. Select the USB Auto Refresh entry and press F8 to select the keyboard type:
5. Press F2 to save your settings.
Enhanced functions
Setting the auto user logout
The user module can be configured so that it auto-disconnects the access to the tar-
get module after a user has been inactive for a certain amount of time. After the con-
figured period of time, the user is logged out from the matrix system.
How to set the auto user logout:
1. Press the
Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F11 to call the Configuration menu.
3. Select the Console entry and press Enter .
4. Select the user module whose settings you want to change and press F5 .
5. Select the Auto logout (min) entry and press Enter .
6. Enter a number between 1 and 99 minutes to set the auto logout and press Enter .
7. Press F2 to save your settings.
Auto-disconnecting the access to a target module
The user module can be configured so that the active access to a target module is
auto-disconnected after the user has been inactive for a certain amount of time.
If the on-screen display is opened at the moment of disconnection, it remains on the
screen even after it has been auto-disconnected.
In case the on-screen display is closed at the moment of
disconnection, the message displayed on the right appears
on the screen of the user console.
off: The connected USB input devices do not need to be reini-
tialised (recommended setting).
all: All USB devices are regularly reinitialised.
only faulty: The status of USB devices is monitored. If the communica-
tion with a USB devices is interrupted, the device is reini-
tialised.
ADVICE: Use the menu’s search function or the sort criteria (see page 9 ff.) to limit
the selection of list entries.
NOTE: The value »0« deactivates the automatic user logout.
CON-Admin
Not connected