Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 106)

Expanding switchable signals
98 · G&D DVICenter
How to change the bus address of a matrix switch:
1. Press Ctrl (default) to open the on-screen display.
2. Press F11 to call the Configuration menu.
3. Choose System and press Enter .
4. Choose Bus address and press F8 to select one of the following options:
5. Press F2 to save your settings.
primary: The central module is operated by the user.
It switches the satellite matrix switches automatically.
satellite 1 … 9: Assign the addresses continuously to the individual stacking
matrix switches.