Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 47)

Switching the target modules automatically or manually
G&D DVICenter · 39
Assigning a scanmode set to a user account
A scanmode set defines the targets to be accessed when the Autoscan, Autoskip or Step-
scan function is carried out.
How to assign a scanmode set to the user account or cancel the existing assign-
ment:
1. Press the Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F10 to call the Personal Profile menu.
3. Select the Scanmode set entry and press Enter .
4. Select the desired scanmode set in the list field.
5. Press F8 to (de)activate the selection.
6. Press F2 to save your settings.
Deleting a scanmode set
How to delete a scanmode set:
1. Press the Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F10 to open the Personal Profile menu.
3. Select the Scanmode set entry and press Enter .
4. Select the scanmode set you want to delete and press F4 .
5. Use the arrow keys to select Yes and press Enter to respond to the prompt for
confirmation.
ADVICE: Use the menu’s search function, the view filter or the sort criteria (see
page 9 ff.) to limit the selection of list entries.
NOTE: An assigned scanmode set is marked with an arrow ().
NOTE: Only users with activated Superuser right (see page 50) can delete a global scan-
mode set.
ADVICE: Use the menu’s search function, the view filter or the sort criteria (see
page 9 ff.) to limit the selection of list entries.