Guntermann & Drunck DVICenter DP16 Configuration and Operation User Manual
Page 132
Controlling the matrix switch via XML
124 · G&D DVICenter
Switching the channel of the target module »DVI-CON-2«
The command
is used to switch the channel of the user module
DVI-CON-2.
The ID or name of the user module as well as the intended channel are used as
parameters.
NOTE:
When connecting an analogue matrix switch via bridging, you can address
its target modules via
ADVICE:
In channel groups the additional video and USB channels are automati-
cally switched with the main channel.
NOTE:
USB modules can also be switched directly – independently from a channel
group.
ESTABLISHING A CONNECTION
DISCONNECTING A CONNECTION
ADVICE:
In addition to entering the channel number with the parameter
missionInterface>
, you can use the parameter
to switch to the channel that is
used to connect the user module to the implemented matrix switch.
User modules
Channel of user module: 1 or 2
Activates the channel that is used to connect the user module to the
implemented matrix switch.