Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 84)

User modules
76 · G&D DVICenter
(De)activating the user module
If you want to deny a user module the access to the matrix system, the user module
can be deactivated.
How to (de)activate the user module:
1. Press the Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F11 to call the Configuration menu.
3. Select the user module you want to (de)activate and press F5 .
4. Select the Enable entry and press F8 to select one of the following options:
5. Press F2 to save your settings.
Enabling/disabling the keyboard support for user modules
By default, user modules start without a keyboard. After the startup, the console
monitor shows the OSD of the matrix switch. Operating the OSD, however, requi-
res a keyboard.
As an alternative, the user module can inerrupt startup by showing a message regar-
ding the missing keyboard. Once you connect a keyboard to the user module, the
startup process continues.
How to enable/disable the startup of a user module without a keyboard:
1. Press the Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F11 to call the Configuration menu.
3. Select the user module you want to (de)activate and press F5 .
NOTE: After the user module has been deactivated, the monitor displays the mes-
sage »This console has been disabled«. It is therefore not possible to call the on-screen
display or the login box.
If a user is currently accessing this user module, access is immediately withdrawn.
ADVICE: Use the menu’s search function or the sort criteria (see page 9 ff.) to limit
the selection of list entries.
yes: activate user module
no: deactivate user module
ADVICE: Use the menu’s search function or the sort criteria (see page 9 ff.) to limit
the selection of list entries.