Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 33)

Accessing target modules via select keys
G&D DVICenter · 25
Accessing target modules via select keys
After the select key modifier(s) and a select key set have been adjusted and a select
key set has been activated in the user account, the target module can be accessed
with key combinations.
Accessing a target module using select keys
Calling the on-screen display is not required when accessing the target module using
select keys. The target module can be accessed faster via select keys.
How to access a target module via select keys:
1. Press the select key modifier(s) that have been adjusted in the matrix system and
the select keys assigned to the target module.
Further information:

Changing the select key modifier and the valid keys on page 25
 Administrating select key sets on page 26
 Assigning a select key set to a user account on page 28
Changing the select key modifier and the valid keys
The select keys enable fast access to a particular target computer by pressing a key
combination. For this, select key sets can be created in the matrix system.
Both the select key modifier and a select key set define the key combination to be
pressed to access a particular target computer.
You can also define valid keys for the select keys.
How to change the select key modifier or the valid keys:
1. Press the
Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F11 to call the Configuration menu.
3. Select System entry and press Enter .
4. Select the Select key entry and press Enter .
EXAMPLE:
 Select key modifiers: Alt Gr+Shift
 Select keys for target module: S
Press Alt Gr+Shift and the select key S . As soon the keys are released, the
switching to the target module takes place.