Selecting the user module’s operating mode, Basic configuration of the user modules, Renaming a user module – Guntermann & Drunck DVICenter DP16 Configuration and Operation User Manual
Page 83
User modules
G&D DVICenter · 75
Selecting the user module’s operating mode
How to select the user module’s operating mode:
1. Press the
Ctrl+Num
(default) hotkey to open the on-screen display.
2. Press
F11
to call the Configuration menu.
3. Select the
Console
entry and press
Enter
.
4. Select the
Console type
entry and press
F8
to select an access type:
5. Press
F2
to save your settings.
Basic configuration of the user modules
Renaming a user module
How to rename a user module:
1. Press the
Ctrl+Num
(default) hotkey to open the on-screen display.
2. Press
F11
to call the Configuration menu.
3. Select the
Console
entry and press
Enter
.
4. Select the user module you want to rename and press
F5
.
5. Select the
Name
entry and press
Enter
.
6. Enter the new name and press
Enter
.
7. Press
F2
to save your settings.
Standard:
Standard operating mode
Open Access:
Open Access operating mode
Video:
Video operating mode
NOTE:
By selecting the Open Access or Video options, you can activate further
submenus to configure the access rights.
The settings are explained in the chapter Administrating user accounts on page 42 ff.
ADVICE:
Use the menu’s search function, the view filter or the sort criteria (see
page 9 ff.) to limit the selection of list entries.