Defining the select keys for the target modules – Guntermann & Drunck DVICenter DP16 Configuration and Operation User Manual
Page 35
Accessing target modules via select keys
G&D DVICenter · 27
4. Press
F3
and enter the following data in the Add select key set menu:
5. Press
F2
to save your inputs and to create the select key sets.
Changing the name and global allocation of a select key set
How to change the name and/or Global setting of a select key set:
1. Press the
Ctrl+Num
(default) hotkey to open the on-screen display.
2. Press
F10
to call the Personal Profile menu.
3. Select the
Select key set
entry and press
Enter
.
4. Select the select key set whose setting you want to change.
5. Press
F5
to change the following data in the Edit select key set menu:
6. Press
F2
to save your settings.
Defining the select keys for the target modules
How to define the select keys for target modules:
1. Press the
Ctrl+Num
(default) hotkey to open the on-screen display.
2. Press
F10
to call the Personal Profile menu
3. Select the
Select key set
entry and press
Enter
.
4. Choose a select key set and press
F5
.
5. Select the
Members
entry and press
Enter
.
Name:
Enter the new select key set name and press
Enter
.
Global:
Select
yes
by pressing
F8
if you want the select key set in the personal
profile to be available for all users of the system.
default:
no
Name:
Enter the new name of the select key set and press
Enter
.
Global:
Press
F8
for selecting
yes
if you want to make the select key set in the
personal profile available to all users of the system.
default:
no
NOTE:
Global select key sets can only be edited by users with activated Superuser
right (see page 50).
Without this right, only the select keys, which are assigned to the target modules,
can be viewed.
NOTE:
This option can only be activated by users with the Superuser right