Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 30)

Accessing target modules (basic functions)
22 · G&D DVICenter
Accessing target modules
(basic functions)
Switching analog video, keyboard, mouse, and audio signals to a user module
allows you to operate the computer connected to the target module.
This chapter describes how to access the target modules by using the on-screen dis-
play. Information on how to access the target modules via select keys are provided
on page 25 ff.
Accessing a target module via on-screen display
The on-screen display of the matrix system allows you to access a target module via
a user module.
How to access a target module via on-screen display:
1. Press the Ctrl+Num (default) hotkey to open the on-screen display.
2. Use the arrow keys to select the target module you want to access.
3. Press Enter .
Returning to the previously accessed target module
The Return to last target function allows you to switch from the currently accessed tar-
get module to the previously accessed target module.
How to return to the last accessed target module:
1. Press the
Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F9 to call the Operation menu.
3. Press G or select the G - Return to last target entry and press Enter .
ADVICE: Use the menu’s search function, the view filter or the sort criteria (see
page 9 ff.) to limit the selection of list entries.
NOTE: A target module can also be accessed using select keys. Further informa-
tion regarding this topic are provided on page 25.
NOTE: This function does not apply if you have only worked on the currently
accessing target module since your login.
ADVICE: After the on-screen display has been called, you are enabled to acti-
vate the Return to last target function in the Select menu by pressing Ctrl+G .