Guntermann & Drunck DVICenter DP16 Configuration and Operation - Manual (Page 21)

The On-Screen Display (OSD)
G&D DVICenter · 13
6. Press F8 to select a hotkey in the Key entry. The on-screen display can be called up
by pressing the hotkey and the selected hotkey modifier(s) at the same time.
7. Press F2 to save your settings.
Opening the on-screen display via double keypress
In addition to opening the on-screen display (OSD) via hotkey (see above), you can
open the OSD by pressing a previously selected key twice ( Ctrl , Alt , Alt Gr , Win , Shift
or Print ).
How to enable/disable opening the on-screen display via double keypress:
1. Press the Ctrl+Num (default) hotkey to open the on-screen display.
2. Press F11 to call the Configuration menu.
3. Select the System entry and press Enter .
4. Select the Hotkey entry and press Enter .
5. Select the OSD via 2x keypress entry and press F8 (repeatedly) to select one of the
following options:
6. Press F2 to save your settings.
Num: Num key
Pause: Pause key
Insert: Insert key
Delete: Delete key
Home: Home key
End: End key
PgUp Page Up key
PgDn Page Down key
Space Space key
Off The OSD can be opened only by pressing the hotkey.
Ctrl , Alt , Alt Gr ,
Win , Shift or Print
The OSD can also be opened by pressing the selected key
twice.