Comtech EF Data CDM-750 - Manual (Page 225)

CDM-750 Advanced High-Speed Trunking Modem Revision 2
Appendix A MN-CDM750
A–3
Step Task
2 To view currently installed FAST features, proceed as follows from the top-level SELECT: FAST menu:
b) Use the ◄►arrows keys to select OPTIONS, and then press ENTER:
FAST options: 1: Set View 2: Set View
3: Set View (◄ ►▲▼)
a) Use the ◄►arrows keys to select View for the desired register #, and then then press ENTER.
b) Use the ▲▼arrow keys to scroll through the list of available FAST options. Options are identified
as ‘Installed’ or ‘Not Installed’. Any that are ‘Not Installed’ may be purchased as a FAST upgrade.
Alternately, the roster of installed vs.
uninstalled FAST Options may be obtained
using the CDM-750 Web Server Interface. Log
in to the Web Server Interface, and open the
Status | Info page. The FAST information is
provided in the Installed Options and
Uninstalled Options sections of this page:
3 Contact a Comtech EF Data sales representative during normal business hours to order features:
• Provide the modem’s 9-digit Baseboard Serial Number to the representative.
• Identify and purchase the desired FAST option(s).
• Obtain the invoice, the register-specific 20-digit FAST Access Code(s), and the FAST option
activation instructions.
When a FAST access code is obtained from Comtech EF Data, it will be for a
specific option register. The FAST options are linked to the three option registers
explained in Sect. A.2.
4 Enter the FAST access code(s):
c) Press CLEAR to return to the SELECT: FAST Æ Options Æ (Register #) Set menu.
d) Use the arrow keys (◄ ►▲▼) to carefully enter each register-specific 20-character FAST
access code.
FAST: Set register1: Enter code below
88888888888888888888 then [ENTER] (◄ ►▲▼)
e) Press ENTER to execute the FAST upgrade.
The modem responds with “Configured Successfully” if the FAST upgrade is accepted; the modem then
resets to its newly-incorporated default configuration.
However, if an invalid code is entered, the following message displays:
Failure to configure. Re-enter code.
88888888888888888888 then [ENTER] (◄ ►▲▼)
Repeat the FAST access code entry procedure. Should the code entry error persist, contact Comtech EF
Data Customer Support for further assistance.