Comtech EF Data CDM-750 - Manual (Page 148)

CDM-750 Advanced High-Speed Trunking Modem Revision 2
Ethernet-based Remote Product Management MN-CDM750
6–4
6.3.3 SNMP Traps
The modem has the ability to send out SNMP traps when certain events occur in the modem. The
modem sends out traps when an alarm or a fault occurs in the modem. These include unit faults,
Tx faults, Rx faults, and ODU faults. A trap is sent both when a fault occurs and is cleared.
The modem supports both SNMPv1 traps and SNMPv2 notifications. Which style of traps the
modem sends can be configured by the user using the CDM750SNMPTrapVersion OID:
• The CDM‐750 supports the following MIB2 SNMPv1traps / SNMPv2 notifications:
MIB2 SNMPv1 trap: Authentication Failure 5
MIB2 SNMPv2 notifications: Authentication Failure 1.3.6.1.6.3.1.1.5.5
• The CDM‐750 supports the following Alarms and Faults SNMPv1 traps:
cdm750UnitAlarmV1 6247600
cdm750TxTrafficAlarmV1 6247601
cdm750RxTrafficAlarmV1 6247602
cdm750TrapStoredEventAlarm 6247603
cdm750RedundancySwitch 6247604
• The CDM‐750 supports the following Alarms and Faults SNMPv2 notifications:
cdm750UnitAlarm 1.3.6.1.4.1.6247.55.2.1.1.1
cdm750TxTrafficAlarm 1.3.6.1.4.1.6247.55.2.1.1.2
cdm750RxTrafficAlarm 1.3.6.1.4.1.6247.55.2.1.1.3
cdm750TrapStoredEventAlarm 1.3.6.1.4.1.6247.55.2.1.1.4
cdm750RedundancySwitch 1.3.6.1.4.1.6247.55.2.1.1.5