Comtech EF Data CDM-750 - Manual (Page 157)

CDM-750 Advanced High-Speed Trunking Modem Revision 2
Ethernet-based Remote Product Management MN-CDM750
6–13
Host Access List
• IP (#) / Mask – The Host Access List allows a user to define which remote clients can connect
when the Access List is Enabled. Each entry allows a user to specify an IP address and a
subnet mask to define a unique class of machines that are allowed access.
For example, if a user wanted to grant access to a PC with an IP Address of 10.10.10.1 and
any PC on a subnet of 192.168.10.xxx, then the Access List would be defined as:
IP 1 / Mask: 10.10.10.1/32
IP 2 / Mask: 192.168.10.0/24
For IP 3 / Mask and IP 4 / Mask, make sure they are not 0.0.0.0/0. An entry with 0.0.0.0/0
simply means any machine is allowed to access.
• Access List – The Access List allows a user to grant access via HTTP and SNMP to a defined
list of client machines. Use the drop‐down list to select Enable or Disable. If Disabled, then
any client machine will be able to connect via HTTP and SNMP.
Click [Submit Admin] to save these settings.