Comtech EF Data CDM-750 - Manual (Page 106)

CDM-750 Advanced High-Speed Trunking Modem Revision 2
Front Panel Operation MN-CDM750
5–28
On the top line: The active Pilot setting displays here.
On the bottom line: The user‐programmed Goldcode displays here.
Press ENTER or CLEAR to return to the previous menu.
5.2.2.3.7 (CONFIG) Rx: EsNo
Receive EsNo Alarm Point = 02.0 dB
( v)
To edit the EsNo Alarm Point: First, use the W X arrow keys to select a digit to edit, and then use
the ST arrows keys to change that digit. Note the following:
• The permitted range is from 00.1 to 16.0 dB.
• If the Rx Es/No falls below this value and the fault is NOT masked, a receive traffic fault
will be generated.
Press ENTER when done.