Comtech EF Data CDM-750 - Manual (Page 116)

CDM-750 Advanced High-Speed Trunking Modem Revision 2
Front Panel Operation MN-CDM750
5–38
5.2.2.9.2 (CONFIG) IP Config: SNMP
SNMP:
Communities Traps
()
Use the W X arrow keys to select Communities or Traps, and then press ENTER.
(CONFIG) IP Config: SNMP
Æ Communities
SNMP Communities:
Read Write
()
Use the W X arrow keys to select the Read or Write community, and then press ENTER.
(CONFIG) IP Config: SNMP Æ Communities Æ Read
SNMP Read Community:
Public (20 chars) (
v)
To edit the SNMP Read Community string: First, use the W X arrow keys to select the
alphanumeric character to edit, and then use the ST arrow keys to edit that character.
Note that only the first 20 characters on the bottom line are available. All printable ASCII
characters are available with the exception of the backslash ‘/’ (ASCII code 92) and tilde ‘~’
(ASCII code 126).
Press ENTER once you compose this string. All trailing spaces are removed from the Read
Community string upon entry.
(CONFIG) IP Config: SNMP Æ Communities Æ Write
SNMP Write Community:
Private (20 chars) (
v)
To edit the SNMP Write Community string: First, use the W X arrow keys to select the
alphanumeric character to edit, and then use the ST arrow keys to edit that character.
Note that only the first 20 characters on the bottom line are available. All printable ASCII
characters are available with the exception of the backslash ‘/’ (ASCII code 92) and tilde ‘~’
(ASCII code 126).
Press ENTER once you compose this string. All trailing spaces are removed from the Write
Community string upon entry.