Comtech EF Data CDM-750 - Manual (Page 204)

CDM-750 Advanced High-Speed Trunking Modem Revision 2
Serial-based Remote Product Management MN-CDM750
7–24
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
SNMP
System
Location
SSL= 255 bytes Command or Query.
Set or return SNMP System Location string.
Example: <1/SSL=Upstairs back right
If not configured it returns empty string: <1/SSL=
SSL =
SSL!
SSL? SSL =x [1..128]
(see description of
arguments)
SNMP
Trap Version
STV= 1 byte, value
of 1 or 2
Command or Query.
Set or return SNMP Trap Version that will be used to send traps in the form x, where:
1 = SNMP Trap Version 1
2 = SNMP Trap Version 2
Example: <1/STV=0
STV =
STV!
STV? STV =x
(see description of
arguments)
Force Reboot FRB= None Command only.
Force unit to perform a reboot.
NOTE: LRS must be set to Serial Remote (LRS=1) or Ethernet plus Serial (LRS=4) before executing this
command.
Example: FRB= (force reboot)
FRB =
FRB?
FRB #
N/A N/A
Reset Factory
Defaults
RFD= None Command only.
Clears the NVRAM in the unit to force a re-initialization at the next boot-up. Also forces a reboot.
NOTE: LRS must be set to Serial Remote (LRS=1) Or Ethernet plus Serial (LRS=4) before executing this
command.
Example: RFD= (will reset to factory defaults)
RFD =
RFD?
RFD #
N/A N/A
DoubleTalk ®
Carrier-in-
Carrier
® (CnC)
Mode
CNM= 1 byte, value
of 0 or 1
Command or Query.
Enable or Disable CnC in the form x, where:
0 = Off
1 = On
Notes:
1. CnC may be enabled only if the optional plug-in hardware CnC card has been installed AND a CnC FAST
option is unlocked.
2. The range of permitted data rates is controlled by a FAST feature code. (Read EID to decode the installed
options for the modem.)
CNM=
CNM?
CNM*
CNM#
CNM? CNM=x
(see Description of
Arguments)