Comtech EF Data CDM-750 - Manual (Page 160)

CDM-750 Advanced High-Speed Trunking Modem Revision 2
Ethernet-based Remote Product Management MN-CDM750
6–16
6.5.4.3.2 Configuration | Utilities
See Chapter 5. FRONT PANEL OPERATION for details pertaining to configuration
parameters available on this page:
Web Page Section Chapter 5 Section Reference
Circuit ID 5.2.7.6 Utility: Circuit ID
Date & Time 5.2.7.1 Utility: Set-RTC
Clocks 5.2.2.4 CONFIG: Clocks
InBand Modem Control 5.2.2.8.2 (CONFIG) Remote Control: Inband
1:1 Redundancy Control 5.2.7.4 Utility: 1:1
1:N Redundancy Control 5.2.7.5 Utility: 1:N
Firmware Image Config 5.2.7.7 Utility: Firmware
Save/Load 5.2.6 SELECT: Store/Ld (Store/Load)
Figure 6-6. Configuration | Utilities page
In addition to the operational parameters detailed in Chapter 5, the Firmware
Image Config section allows you to reboot the modem. Click [Reboot Modem] to
execute this feature. You will need to re‐enter your user name and password to
continue using the CDM‐750 Web Server Interface upon successful reboot of the
modem.
Once the desired configuration settings have been made in each section, click [Submit] to save
the settings for that section.