Comtech EF Data CDM-750 - Manual (Page 197)

CDM-750 Advanced High-Speed Trunking Modem Revision 2
Serial-based Remote Product Management MN-CDM750
7–17
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
WAN Buffer
Length
WBL 3 bytes Command or Query.
Set or return WAN Buffer Length in the form xxx, where:
xxx = 20 to 400ms, in 20ms steps.
Example: WBL=100
WBL=
WBL?
WBL*
WBL#
WBL? WBL=xxx
(see Description of
Arguments)
IP Statistics
N/A 143 bytes Query only.
Returns all IP Statistics. Return format for each parameter is x.xE+xx with each parameter separated by a colon:
GigE 1 Parameters
Packets from LAN
Packets to LAN
Bytes from LAN
Bytes to LAN
GigE 2 Parameters
Packets from LAN
Packets to LAN
Bytes from LAN
Bytes to LAN
WAN Parameters
Packets to WAN
Bytes to WAN
Packets from WAN
Bytes from WAN
M&C Parameters
Packets from M&C
Packets to M&C
Optical Parameters
Packets from LAN
Packets to LAN
Bytes from LAN
Bytes to LAN
N/A ST1? ST1=(see
Description of
Arguments)