Altera Stratix V Avalon-MM Interface for PCIe Solutions - Manual (Page 26)

Parameter Possible Values Default Value Description
• 0111 Ranges A, B, and C
• 1110 Ranges B, C and D
• 1111 Ranges A, B, C, and D
All other values are reserved. Altera recommends that
the completion timeout mechanism expire in no less
than 10 ms.
Implement
completion
timeout
disable
On/Off On For Endpoints using PCI Express version 2.1 or 3.0, this
option must be On. The timeout range is selectable.
When On, the core supports the completion timeout
disable mechanism via the PCI Express
Device
Control Register 2
. The Application Layer logic must
implement the actual completion timeout mechanism
for the required ranges.
Error Reporting
Table 3-5: Error Reporting
Parameter Value Default Value Description
Advanced
error
reporting
(AER)
On/Off Off When On, enables the Advanced Error Reporting (AER)
capability.
Enable
ECRC
checking
On/Off Off When On, enables ECRC checking. Sets the read-only
value of the ECRC check capable bit in the
Advanced
Error Capabilities and Control Register
. This
parameter requires you to enable the AER capability.
Enable
ECRC
generation
On/Off Off
When On, enables ECRC generation capability. Sets the
read-only value of the ECRC generation capable bit in
the
Advanced Error Capabilities and Control
Register
. This parameter requires you to enable the
AER capability.
3-6 Error Reporting
UG-01097_avmm
2014.12.15
Altera Corporation Parameter Settings
Send Feedback