Nor-Cal SDC15 Controller - Manual (Page 87)

5-37
■ DI Assignment setting with Smart Loader Package SLP-C35
When setting [DI Assignment] with the Smart Loader Package SLP-C35 , select
[Edit (E) ] → [Input port setup (O)] in that order from the [Input] menu. The
input bit function, input assign, polarity of input assign, and polarity of input bit
function can be easily set using visual images as shown below.
Handling Precautions
In addition to the selection through the menu, the Input port setup
window can also be opened using the following procedures:
Click the input/output port setup icon .
Right-click in the input bit function setting window.
Press the [Ctrl] and [P] keys at the same time.
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
Select the input bit function. The image of the
ladder is changed according to the selected
input bit function.
Select four input assigns A to D.
Select whether or not the polarity is set for
assigns A to D. Select whether or not the polarity of
the bit function is made.