Nor-Cal SDC15 Controller - Manual (Page 81)

5-31
■ DI Assignment of SP ramp enabled/disabled
The LSP group selection can be set for internal contacts 1 to 3 using the DI
Assignment.
• Details of SP ramp enabled/disabled with internal contact function
The following shows the SP ramp enabled/disabled setting with the internal
contact ON/OFF:
OFF: SP ramp enabled. ON: SP ramp disabled.
The SP ramp enabled/disabled is set for only one internal contact.
• When the SP ramp is set disabled, the SP ramp operation is stopped and the SP
value becomes the final SP.
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
Item (Setting display/bank) Display Contents Initial value User level
DI Assignment Internal
Contacts 1 to 3 Operation
type
(Setup setting/DI
Assignment bank) 0: No function
13: SP ramp enabled/disabled.
1 to 12, 14 to 20: Other functions 0 Simple,
Standard,
High function
0
0