Nor-Cal SDC15 Controller - Manual (Page 125)

5-75
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
■ PV/SP display setup
Whether or not the PV/SV value related items are displayed in the operation
display mode can be set.
• When using the Smart Loader Package SLP-C35 , not only the numeric value,
but also the bit input can be used to set [PV/SP display setup: C74].
Handling Precautions
• Even though the LSP group number display is set at [Enabled], the
LSP group number is not displayed when [C30: LSP system group] is
set at “1”.
Item (Setting display/bank) Display Contents Initial value User level
PV/SP display setup
(Setup setting/Setup bank) Whether or not the PV/SP value related items
are displayed in the operation display mode is
determined by the sum of the following
weights:
Bit 0: PV display
Disabled: 0, Enabled: +1
Bit 1: SP display
Disabled: 0, Enabled: +2
Bit 2: LSP group number display
Disabled: 0, Enabled: +4
Other invalid settings, 0, +8
15 Standard,
High function
2 3 2 2 2 1 2 0
Undefined.
LSP group number display
SP display
PV display