Nor-Cal SDC15 Controller User Manual
Page 105
5-55
• When the object control output is the relay output or voltage pulse output, and
the operation type of the DO Assignment is set for output bit functions 1 to 4, the
display and setting can be made.
• When the object event output is provided and the operation type of the DO
Assignment is set for output bit functions 1 to 4, the display and setting can be
made.
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
Item (Setting display/bank)
Display
Contents
Initial value
User level
Event output 2 Output
assign A (Setup setting/DO
Assignment bank)
Same as those on the previous page.
3
Same as that
on the
previous
page.
Event output 2 Output
assign B (Setup setting/DO
Assignment bank)
0
Event output 2 Output
assign C (Setup setting/DO
Assignment bank)
0
Event output 2 Output
assign D (Setup setting/DO
Assignment bank)
0
Event output 3 Output
assign A (Setup setting/DO
Assignment bank)
4
Event output 3 Output
assign B (Setup setting/DO
Assignment bank)
0
Event output 3 Output
assign C (Setup setting/DO
Assignment bank)
0
Event output 3 Output
assign D (Setup setting/DO
Assignment bank)
0