Nor-Cal SDC15 Controller User Manual
Page 154
6-20
Chapter 6. LIST OF DISPLAYS AND SETTING DATA
Display
Item
Contents
Initial
value
User
level
Remarks
The digits are determined to 1st digit,
2nd digit, 3rd digit, and 4th digit from
the right end.
0: Direct
1: Reverse
0000
2
Control output 1
Polarity
0: Direct
1: Reverse
0
2
Control output 1
Latch
0: None
1: Latch (Latch at ON)
2: Latch (Latch at OFF except for
initialization at power ON)
0
2
Control output 2
Operation type
Same as Control output 1 Operation
type.
0: Default output
1: MV1
2: MV2
3 to 6: Function 1 to 4
0
2
Displayed when control
output 2 of the model is
voltage pulse output.
When using control output 2,
the default output is MV2.
Control output 2
Output assign A
Same as Control output 1 Output
assign A to D.
0 to 49
15
2
Displayed when control
output 2 of the model is
voltage pulse output and the
operation type of control
output 2 is function 1 to 4
(ot2.1 > 2).
Control output 2
Output assign B
0
2
Control output 2
Output assign C
0
2
Control output 2
Output assign D
0
2
Control output 2
Polarity A to D
1st digit: Polarity A
2nd digit: Polarity B
3rd digit: Polarity C
4th digit: Polarity D
Same as Control output 1 Polarity A
to D.
The following setting applies to each
digit:
0: Direct
1: Reverse
0000
2
Control output 2
Polarity
0: Direct
1: Reverse
0
2
Control output 2
Latch
0: None
1: Latch (Latch at ON)
2: Latch (Latch at OFF except for
initialization at power ON)
0
2
Control output 2
Polarity A to D
1st digit: Polarity A
2nd digit: Polarity B
3rd digit: Polarity C
4th digit: Polarity D