Nor-Cal SDC15 Controller - Manual (Page 155)

6-21
Chapter 6. LIST OF DISPLAYS AND SETTING DATA
Display Item Contents Initial
value User
level Remarks
Event output 1
Operation type Same as Control output 1 Operation
type.
0: Default output
1: MV1
2: MV2
3 to 6: Function 1 to 4 0 2
Event output 1
Output assign A Same as Control output 1 Output
assign A to D.
0 to 49 2 2
Event output 2
Operation type Same as Control output 1 Operation
type.
0: Default output
1: MV1
2: MV2
3 to 6: Function 1 to 4 0 2 Displayed when the optional
model has Event output 2.
When using Event output 2,
the default output is Internal
Event 2.
Event output 1
Output assign B 0 2
Event output 1
Output assign C 0 2
Event output 1
Output assign D 0 2
Event output 1
Polarity A to D
1st digit: Polarity A
2nd digit: Polarity B
3rd digit: Polarity C
4th digit: Polarity D 0000 2
Event output 1
Polarity 0: Direct
1: Reverse 0 2
Event output 1
Latch 0: None
1: Latch (Latch at ON)
2: Latch (Latch at OFF except for
initialization at power ON)
0 2
Displayed when the optional
model has Event output 1.
When using Event output 1,
the default output is Internal
Event 1.
Displayed when the optional
model has Event output 1
and the operation type of
Event output 1 is function 1
to 4 (Ev1.1 > 2).
Same as Control output 1 Polarity A
to D.
The following setting applies to each
digit:
0: Direct
1: Reverse
Event output 2
Output assign A Same as Control output 1 Output
assign A to D.
0 to 49 3 2 Displayed when the optional
model has Event output 2
and the operation type of
Event output 2 is function 1
to 4 (Ev2.1 > 2).
Event output 2
Output assign B 0 2
Event output 2
Output assign C 0 2
Event output 2
Output assign D 0 2
Event output 2
Polarity A to D
1st digit: Polarity A
2nd digit: Polarity B
3rd digit: Polarity C
4th digit: Polarity D Same as Control output 1 Polarity A
to D.
The following setting applies to each
digit:
0: Direct
1: Reverse 0000 2
Event output 2
Polarity 0: Direct
1: Reverse 0
2 Event output 2
Latch 0: None
1: Latch (Latch at ON)
2: Latch (Latch at OFF except for
initialization at power ON)
0
2