beautypg.com

Nor-Cal Intellisys Throttling SoftShut Valve User Manual

Nor-Cal Accessories for water

background image

Intelli

sys

Throttling SoftShut (TSS) Valve

Quick-Start Guide

TSS DN-63, DN-80, DN-100, DN 160, DN-200 and DN-250

Nor-Cal Products, Inc. 1967 South Oregon St., Yreka, CA 96097 USA

LIT-TSS-QSG, 01/2005

Unpacking & Handling

Use care when unpacking an Intellisys SoftShut Valve. Flange surfaces can scratch easily. SoftShut Valves are
manufactured primarily from Stainless Steel, and are very heavy. A static-safe, particle-free work surface is
recommended. There is no need to remove parts during installation or inspection.


Check The Package Contents:

Intellisys Throttling SoftShut (TSS) Valve

NOTE: IQ-series controllers are mounted directly to the TSS

This Quick-Start Guide


Serial Label

A Serial Label on the TSS Valve shows the model number and serial number of your product.







Warranty

Nor-Cal Intellisys Controllers and valves are warranted against defects and material workmanship for a period of
12 months after the date of shipment to the buyer. For complete warranty and Intellectual Property details,
please refer to the full manual.

Pre-Installation Functionality Check

Refer to the diagrams & photographs on the back of this sheet for locations of the items that follow.

WARNING: The valve plate movement presents a severe pinching/crushing
hazard. Please keep fingers, hands and other objects away from the valve
opening and associated moving parts.

Connect Power and Valve Cables
Connect the APC controller to the valve motor with a Nor-Cal TBV-CRD series cable. (NOTE: IQ-series valves
do not require a valve cable connection, as the motor is integrated into the controller.) Connect the controller to
an appropriate power source. Toggle the power switch (if applicable) or apply DC power from your source.

Initialize the Valve
From the tool software, send the appropriate initialization command to begin initialization. During Initialization,
the valve will complete a 30-second initialization sequence during which the valve plate will cycle back-and-forth
several times. The valve will eventually stop in the open position, unless specified otherwise by the firmware.

Open/Close Testing
Verification of the system communications can be done by toggling the “OPEN / CLOSE” switch (if available) on
the controller front panel, or sending the appropriate command from the tool software. If the valve does not
operate as described, please contact Nor-Cal technical support.


Obtaining Complete Manuals

To download complete manuals for Intellisys TSS Valves, please visit

www.n-c.com

. Click Support, choose

Product Documentation Downloads from the drop-down menu, and pick Downstream Pressure Control
under Manuals at the left.


TSS Serial Label