Nor-Cal SDC15 Controller - Manual (Page 156)

6-22
Chapter 6. LIST OF DISPLAYS AND SETTING DATA
Display Item Contents Initial
value User
level Remarks
Event output 3
Operation type Same as Control output 1 Operation
type.
0: Default output
1: MV1
2: MV2
3 to 6: Function 1 to 4 0 2
Event output 3
Output assign A Same as Control output 1 Output
assign A to D.
0 to 49 4 2
Event output 3
Output assign B 0 2
Event output 3
Output assign C 0 2
Event output 3
Output assign D 0 2
Event output 3
Polarity A to D
1st digit: Polarity A
2nd digit: Polarity B
3rd digit: Polarity C
4th digit: Polarity D 0000 2
Event output 3
Polarity 0: Direct
1: Reverse 0 2
Event output 3
Latch 0: None
1: Latch (Latch at ON)
2: Latch (Latch at OFF except for
initialization at power ON)
0 2
Displayed when the optional
model has Event output 3.
When using Event output 3,
the default output is Internal
Event 3.
Displayed when the optional
model has Event output 3
and the operation type of
Event output 3 is function 1
to 4 (Ev3.1 > 2).
Same as Control output 1 Polarity A
to D.
The following setting applies to each
digit:
0: Direct
1: Reverse