Nor-Cal SDC15 Controller - Manual (Page 151)

6-17
Chapter 6. LIST OF DISPLAYS AND SETTING DATA
Display Item Contents Initial
value User
level Remarks
Internal Contact 1
Polarity A to D The digits are determined to 1st digit,
2nd digit, 3rd digit, and 4th digit from
the right end. 0000 2
Internal Contact 1
Polarity 0: Direct
1: Reverse 0 2
Internal Contact 1
Event channel def. 0: Every Internal Event
1 to 5: Internal Event No. 0 2 Displayed when the
operation type of internal
contact 1 is timer stop/start
(dl1.1 = 17).
Displayed when internal
contact 1 Input bit function is
function 1 to 4 (dl1.2
≠ 0).
1st digit: Polarity A
(Polarity of Input
assign A) 0: Direct
1: Reverse
2nd digit: Polarity B
(Polarity of Input
assign B)
3rd digit: Polarity C
(Polarity of Input
assign C)
4th digit: Polarity D
(Polarity of Input
assign D)
Internal Contact 2
Operation type Same as Internal Contact 1
Operation type.
0 to 20 0 0
Internal Contact 2
Input bit function Same as Internal Contact 1 Input bit
function.
0: Not used. (Default input)
1 to 4: Function 1 to 4 0 2 When using internal contact
2, the default input is DI
(digital input) 2.
Internal Contact 2
Input assign A Same as Internal Contact Input
assign A to D.
0 to 33 3 2 Displayed when internal
contact 2 Input bit function is
function 1 to 4 (dl2.2
≠ 0).
Internal Contact 2
Input assign B 0 2
Internal Contact 2
Input assign C 0 2
Internal Contact 2
Input assign D 0 2
Internal Contact 2
Polarity A to D
1st digit: Polarity A
2nd digit: Polarity B
3rd digit: Polarity C
4th digit: Polarity D Same as Internal Contact 1 Polarity
A to D
The following setting applies to each
digit:
0: Direct
1: Reverse 0000 2
Internal Contact 2
Polarity 0: Direct
1: Reverse 0 2
Internal Contact 2
Event channel def. 0: Every Internal Event
1 to 5: Internal Event No. 0 2 Displayed when the
operation type of internal
contact 2 is timer stop/start
(dl2.1 = 17).
Internal Contact 3
Operation type Same as Internal Contact 1
Operation type.
0 to 20 0 0
Internal Contact 3
Input bit function Same as Internal Contact 1 Input bit
function.
0: Not used. (Default input)
1 to 4: Function 1 to 4 0 2 When using internal contact
3, the default input is invalid.