Nor-Cal SDC15 Controller - Manual (Page 136)

6-2
Chapter 6. LIST OF DISPLAYS AND SETTING DATA
Display Item Contents Initial
value User
level Remarks
Internal Event 3
main setting The allowable setting range may vary
depending on the operation type of
the internal event.
-1999 to +9999U: Set value is other
than the following values.
0 to 9999U: Set value is an absolute
value.
-199.9 to +999.9%: Set value is MV. 0 0 Setting required by the
operation type of the internal
event is displayed.
Whether or not this item is
displayed is selected by the
EV display setup (C76).
Internal Event 3
sub setting 0 0
Internal Event 3
remaining time Setting is disabled.
“ ” is displayed at the right end digit
when using the ON delay time.
“L” is displayed at the right end digit
when using the OFF delay time. L — 0 Whether or not this item is
displayed is selected by the
timer remain time display
setup (C77).
(Display
example)