Nor-Cal SDC15 Controller - Manual (Page 132)

5-82
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
2. To register currently setting item into the user function:
If there are any parameters you wish to register into the user function during
setting, follow the steps below to register such parameters.
(1) Keep the cursor placed in an item you wish to register and set, and then left-
click the [UF] icon.
>> The user function resister box will appear.
(2) Check on Nos. you wish to register and click [Register] .
>> Items you have checked on are then registered.
Note
The registered contents can also be checked by selecting [Option] → [User
Function] .
(1)
(1)
(2)