Nor-Cal SDC15 Controller - Manual (Page 126)

5-76
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
■ MV display setup
Whether or not the MV related items are displayed in the operation display mode
can be set.
• When using the Smart Loader Package SLP-C35 , not only the numeric value,
but also the bit input can be used to set [MV display setup: C75].
Handling Precautions
• Even though the heat MV/cool MV display is set at [Enabled], the heat
MV/cool MV is not displayed when [Heat/Cool control: C26] is set at
“0” (Disabled).
• Even though the AT progress display is set at [Enabled], the AT
progress is not displayed while the AT is stopping.
Item (Setting display/bank) Display Contents Initial value User level
MV display setup
(Setup setting/Setup bank) Whether or not the MV value related items are
displayed in the operation display mode is
determined by the sum of the following
weights:
Bit 0: MV display
Disabled: 0, Enabled: +1
Bit 1: Heat MV/cool MV display
Disabled: 0, Enabled: +2
Bit 3: AT progress display
Disabled: 0, Enabled: +8
Other invalid settings, 0, +4
15 Standard,
High function
2 3 2 2 2 1 2 0
AT progress display
Undefined.
Heat MV/Cool MV display
MV display