EXFO FTB/IQS-85100G Packet Blazer for FTB-500/IQS-600 - Manual (Page 86)

Test Setup - Test Configurator, Timer, and System
76 FTB/IQS-85100G
EtherBERT and Unframed BERT
Note: The following frame parameters are only available for OTN BERT test
application with Ethernet client (EoOTN).

Source MAC Address is the module default and unique Source Media
Access Control (MAC) address that is automatically given to the
stream. Tap the Source MAC Address field if the stream MAC address
has to be changed and enter the new MAC address.

Destination MAC Address is the destination MAC address for the
stream. The default setting is the MAC address of the port. Tap the
Destination MAC Address field if the stream MAC address has to be
changed and enter the new MAC address.

VLAN ID check box, when selected (cleared by default), allows the
configuration of the following VLAN parameters. Selecting the VLAN
check box affects the Frame Size value.

VLAN ID sets the VLAN ID. Choices are 0 through 4095 (default
is 2). Refer to VLAN ID and Priority on page 402 for more
information.

Priority sets the VLAN user priority. Choices are 0 (default) to 7.
Refer to VLAN ID and Priority on page 402 for more information.

Type indicates the supported VLAN Ethernet type which is 0x8100.