EXFO FTB/IQS-85100G Packet Blazer for FTB-500/IQS-600 - Manual (Page 250)

Test Results
240 FTB/IQS-85100G
Summary (Traffic Gen & Mon)
Summary (Traffic Gen & Mon)
From the Test menu, tap Results, and the Summary tab.

Test Status indicates the actual test status as follows. The global test
pass/fail verdict is displayed next to the Test Status when enabled (see
QoS Metrics on page 154).

“--”: The test is not running or results are not available.

In Progress: The test is running.

Completed: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.

Start Time indicates the date and time the test has been started. The
date and time is reset every time the test is restarted or reset.

Test/Power Recovery: Test Recovery (Widows 8 or above) or
Power Recovery (Windows XP), when displayed, indicates that the
test has automatically recovered from a power failure. The number of
occurrences is also displayed next to the Test/Power Recovery field.
Refer to Power Failure Recovery on page 329.

Logger Full, when displayed, indicates that the logger is full. Refer to
Logger on page 213.
Stream
The following statistics are available for each stream.

Current Throughput: See Streams - Throughput on page 229.

Frame Loss Rate: See Streams - Frame Loss / Out-of-Sequence on
page 227.

Jitter: See Streams - Jitter on page 227.

Latency: See Streams - Latency on page 228.

Out-of-Sequence: See Streams - Frame Loss / Out-of-Sequence on
page 227.