EXFO FTB/IQS-85100G Packet Blazer for FTB-500/IQS-600 User Manual
Page 149
Test Setup - Test Configurator, Timer, and System
Packet Blazer
139
Signal - Signal Configuration (OTN)
ODU4, ODU3, ODU3e1, ODU3e2, ODU2, ODU1, ODU0, or ODUflex
OPU Tributary Port, available for each OPU level of a mapped
signal, indicates the OPU tributary port used for the test. Tap the
Modify Trib Slots/Port button to change the OPU tributary port.
OPU Tributary Slots, available for each OPU level of a mapped
signal, indicates the OPU tributary slots used for the test. Tap the
Modify Trib Slots/Port button to change the OPU tributary slots.
TCM indicates each Tandem Connection enabled; No TCM
indicates that no TCM is enabled. To enable TCM, tap the
Config TCM button.
Background Traffic, available for a multiplex signal, is used to
generate traffic on the timeslots that are not part of the foreground test
traffic. Choices are Unallocated (available with PT21 only), AIS, Null
Client, and PRBS31 (default). The background traffic is configurable
for each mux type when the multiplex signal contains both PT20 and
PT21 mux types.
Higher Layer
Tributary
Background Traffic
a
a.
Uses the selected AIS, Null Client, or PRBS31 background traffic unless Unallocated
is selected which corresponds to undefined traffic.
ODU4
ODU3, ODU2, ODU1, ODU0,
ODU2e, ODU1e, ODUflex
1.25 Gbit/s
b
or Unallocated
b.
Per tributary slot.
ODU3
ODU2
Fixed structure: ODU2
Non fixed structure: ODU1
ODU1
ODU1
ODU0, ODUflex
1.25 Gbit/s
b
or Unallocated
ODU2
ODU1
ODU1
ODU0
1.25 Gbit/s
b
or Unallocated
ODU1
ODU0
ODU0