EXFO FTB/IQS-85100G Packet Blazer for FTB-500/IQS-600 - Manual (Page 179)

Test Results
Packet Blazer 169
Alarms/Errors
Alarms/Errors
From the Test menu, tap Results, and the Alarms/Errors tab. Depending
on the test structure, the Alarms/Errors page may be split in different tabs
such as OTN, GFP-T/GFP-F, and Ethernet; tap on the desired tab when
required.
Alarms/errors blocks containing the magnifier (+) icon in its title, opens a
zoomed view giving more details like alarms/errors for each lane (parallel
interface), errors in seconds, count, and rate.
When there is not enough room on the page to display the error in
seconds, count, and rate, the error is displayed in Seconds per default. To
select another unit, tap on the unit’s button and select either Seconds
(default), Count, or Rate.
Total, available with certain errors (parallel interface), indicates the total of
all lanes when Count or Rate unit is selected.
The following table lists the availability of alarms/errors per layer for
TX and RX.
Layer Alarms/Errors Page
TX/RX RX only
BER Pattern Loss No Traffic 171
Bit Error Mismatch ‘0’, Mismatch ‘1’,
Frame Loss, Out-of-Seq.
CLOCK - LOC 172
Ethernet Link Down, Remote Fault, Local Fault a Hi-BER, Local Fault Det.,
Local Fault Rcd. 173
FCS Jabber, Oversize, Runt, Undersize
Ethernet -
PCS Lanes - LOA, Inv. Mapping, LOBL, LOAML,
Exc. Skew 175
Block, Inv. Marker, PCS BIP-8 -
FEC CORR-BIT, CORR-CW, CORR-SYM, STRESS,
UNCORR-CW CORR, UNCORR 193